It is a blend of carefully selected high quality aggregates and specially designed BitChem Binder manufactured in “State of Art” Plant under carefully controlled condition. Excellent results in summer heat, bitter cold or wet condition, known as pavement preservation products. SELF LIFE of Produced Mix is 2 years in seal condition. It is to be used for cold, wet and normal surface.
Features:
- Smooth transportation
- Reduction of losses & decreasing the maintenance cost
- Reducing the time of conveyance
- Preventing further degradation of roads
- Reducing the effects of degraded roads on the vehicle
Advantages:
- Bonds well to cool and wet surfaces
- Can apply to potholes without preparation and without Tack Coat
- Low-temperature cure
- Minimal preparation time for surface repairing
- Stable patch formation
- Saves time
- Environment-friendly and economical
- Skid resistant
- Resistance to deformation, bleeding, and cracking
- No heating required
- Minimum manpower
- Ease of application
- Resistance to stripping (water)
- Resistance to peeling under water
- Instant setting and faster development of strength
Key Elements of the Ready MIX:
- BitChem Binder – (4.5 % by wt of mix)
- Graded Aggregate- As per IRC: SP : 100 – 2014
Aggregate: Gradation
|
Sieve Size(mm)
|
Cumulative Passing %
|
Final Result
|
|
9.5
|
100
|
100
|
|
4.75
|
40-100
|
42.9 |
|
2.36
|
10-40
|
11.5
|
|
1.18
|
0-10
|
0.7
|
|
0.075
|
0-2
|
0.6
|
Condition of applying Ready MIX:
|
Particulars
|
Condition
|
|
Traffic (CVPD)
|
No limit
|
|
Rainfall
|
No limit |
|
Temperature
|
-20 to 45⁰C
|
Storage of MIX:
The Ready Mix prepared with graded aggregates and BitChem Binder can be stored for 2 years in airtight package in shady area away from heat source and electric plant.
Performance:
|
Particulars
|
Performance
|
|
Maximum depth of patch to be repaired
|
40-100 mm
|
|
Durability of patch/pothole using ready mix
|
Min 2 yrs
|
|
Time required to move traffic after repair
|
Immediate
|
How to use: Cut the bag follow the procedure as mentioned below
1. Potholes with no preparation and no tack coat. “Bitchem Ready Mix for Cold and Wet surfaces” displaces water, snow and any form of debris from surfaces.
2. Cut the bag with Scissor.
3. Fill the Pothole with Ready Mix. Mix is intended for filling potholes up to 40-100 mm.
4. Open to traffic after application.
Share this Page!